Device Configuration; Outlet Information - LEGRAND Server Technology PRO3X User Manual

Device Configuration

This command shows the device configuration, such as the device name, firmware version, model type
and upper limit of active powered dry contact actuators. The CLI is supported by various Xerus products,
so you must insert your specific <device-name> as shown in these commands.
• •
SRC <device-name>: src.
• •
All PDUs and Transfer Switches <device-name>: pdu.
• •
All branch circuit monitors and power meters <device-name>: pmc.
show <device-name>
#
To show detailed information, add the parameter "details" to the end of the command.
show <device-name> details
#
Note: Your Xerus product may not support all commands.

Outlet Information

This command syntax shows the outlet information.
# show outlets <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show outlets <n> details
Variables:
• • <n> is one of the options: all, or a number.
Option Description
all Displays the information for all outlets.
Tip: You can also type the command without adding this
option "all" to get the same data.
A specific outlet Displays the information for the specified outlet only.
number
335