Managing One Sensor Or Actuator - LEGRAND Server Technology PRO3X User Manual

Managing One Sensor or Actuator

If you are managing only one sensor or actuator, you can assign the desired ID number to it. When
managing multiple sensors/actuators at a time, the IDs are automatically assigned.
Tip: When the total of managed sensors/actuators reaches the maximum value, you cannot manage
additional ones. The only way to manage any sensor/actuator is to release or replace the managed
ones. To replace a managed one, assign an ID number to it by following the procedure below.
▶
To manage only one sensor/actuator:
1) Click Peripherals in the Menu.
2) Unmanaged sensors/actuators appear at the end of the list as "Manage Device". You can identify
the sensor/actuator by the Type, Serial Number, and Position columns.
3) Click the Manage Device link, and the Manage Peripheral Device dialog appears.
140