LEGRAND Server Technology PRO3X User Manual page 432

Type
authenticatedBind
• •
<base_DN> is the base DN for search.
• •
<login_name_att> is the login name attribute.
• •
<user_entry_class> is the User Entry Object Class.
Optional Parameters
You can add one or multiple "optional parameters", such as specifying the Bind DN or certificate upload,
to an LDAP-server-adding command as illustrated below. If adding multiple optional parameters, you
must add them to the END of the command and separate them with a space.
• •
Example 1 -- Specify an Active Directory Domain's name:
config:# authentication ldap add <host> <port> <ldap_type> <security>
<bind_type> <base_DN> <login_name_att> <user_entry_class>
adDomain <AD_domain>
• •
Example 2 -- Set up the bind DN:
config:# authentication ldap add <host> <port> <ldap_type> <security>
<bind_type> <base_DN> <login_name_att> <user_entry_class> bindDN
<bind_DN>
▶
"Optional Parameters" table:
Parameters
userSearchSubfilter <filter>
bindDN <bind_DN>
adDomain <AD_domain>
verifyServerCertificate
<verify_cert>
allowExpiredCertificate
<allow_exp_cert>
Variables:
432
Description
Enable the Bind with authentication.
Bind DN and password are required.
To configure
User search subfilter
bind DN
• • The system will prompt you to enter and re-confirm the bind
password after adding this parameter to the command.
Active Directory Domain name
Certificate verification setting
• •
After setting to true, the system will prompt you to upload a
certificate.
Whether to accept expired or not valid yet certificate