LEGRAND Server Technology PRO3X User Manual page 334

Interface Description
wireless Show the WIRELESS interface's non-IP settings.
bridge Show the BRIDGE interface's non-IP settings.
all Show the non-IP settings of all interfaces.
Tip: You can also type the command without adding this
option "all" to get the same data. That is, show network
interface.
Network Service Settings
This command shows the network service settings only, including the Telnet setting, TCP ports for HTTP,
HTTPS, SSH and Modbus/TCP services, and SNMP settings.
# show network services <option>
Variables:
• •
<option> is one of the options: all, http, https, telnet, ssh, snmp, modbus and zeroconfig.
Option Description
all Displays the settings of all network services, including HTTP, HTTPS,
Telnet, SSH and SNMP.
Tip: You can also type the command without adding this option
"all" to get the same data.
http Only displays the TCP port for the HTTP service.
https Only displays the TCP port for the HTTPS service.
telnet Only displays the settings of the Telnet service.
ssh Only displays the settings of the SSH service.
snmp Only displays the SNMP settings.
modbus Only displays the settings of the Modbus/TCP service.
redfish Only displays the redfish service settings.
zeroconfig Only displays the settings of the zero configuration advertising.
334