Closing A Local Connection; Logging Out Of Cli; Tips For Using The Cli; The ? Command For Showing Available Commands - LEGRAND Server Technology PRO3X User Manual

• •
User Mode: When you log in as a normal user, who may not have full permissions to configure the
PRO3X, the > prompt appears.
• •
Administrator Mode: When you log in as an administrator, who has full permissions to configure the
PRO3X, the # prompt appears.
• • Configuration Mode: You can enter the configuration mode from the administrator or user mode. In
this mode, the prompt changes to config:# or config:> and you can change PRO3X device and
network configurations. See
• • Diagnostic Mode: You can enter the diagnostic mode from the administrator or user mode. In this
mode, the prompt changes to diag:# or diag:> and you can perform the network troubleshooting
commands, such as the ping command. See
472).

Closing a Local Connection

Close the window or terminal emulation program when you finish accessing the PRO3X over the local
connection.
When accessing or upgrading multiple PRO3X devices, do not transfer the local connection cable from
one device to another without closing the local connection window first.

Logging out of CLI

After completing your tasks using the CLI, always log out of the CLI to prevent others from accessing the
CLI.
▶
To log out of the CLI:
1) Ensure you have entered administrator mode and the # prompt is displayed.
2) Type exit and press Enter.

Tips for Using the CLI

The ? Command for Showing Available Commands

When you are not familiar with CLI commands, you can press the ? key at anytime for one of the
following purposes.
• •
Show a list of main CLI commands available in the current mode.
• •
Show a list of available commands or parameters for the command you type.
▶
In the administrator mode:
#
Configuring the Device and Network
Network Troubleshooting in Diagnostic Mode
?
(on page 354).
(on page
327