LEGRAND Server Technology PRO3X User Manual page 62

• •
Link ID
• • Communication status (for link unit only)
• •
Device name
• •
Model name
• •
Serial number
• •
Firmware version
# pdu list
▶
Switch Unit
Switch between the primary and link units. The Link ID must be 1 (primary) or 2-8 (link units).
# pdu [id]
▶
Add a New Link Unit
Add a link unit to a primary unit. Only available when ID 1 (primary) is selected. The command can be
used to re-establish a connection to an existing link unit if the Link ID and host match exactly. The
command requires admin privileges and prompts for the user's password.
# pdu link [id] [host] [login]
• • id: New link ID (IDs 2-8)
• •
host: Host name or IP address
• •
login: Name of user with admin privileges
▶
Release a Link Unit
Release a link unit from a chain until the unit becomes standalone. The primary unit does not have
access to a released link unit. The command is only available when ID 1 (primary) is selected. The
command requires admin privileges, and prompts for confirmation unless the "/y" is specified.
# pdu release [id] {/y}
• •
id: Link ID of the unit to be released (IDs 2-8).
62