Rebooting - LEGRAND Server Technology PRO3X User Manual

▶
Hardware failure(s) detected:
▶
Hardware failure types:
Hardware issues
Network device not detected
I2C Bus stuck
Expansion unit controller not
reachable
Expansion unit controller
malfunction
Outlet power state inconsistent

Rebooting

You can remotely reboot the PRO3X via the web interface.
Resetting/rebooting does not interrupt the operation of connected servers because there is no loss of
power to outlets. During and after the reboot, outlets that have been powered on prior to the reboot
remain powered on, and outlets that have been powered off remain powered off.
Warning: Rebooting deletes all webcam snapshots that are saved locally. If needed, download
important snapshots before rebooting the device.
▶
To reboot the device:
1) Choose Maintenance > Unit Reset > Reboot Unit.
Description
A specific networking interface is NOT detected.
A specific I2C bus is stuck, which affects the communication with
sensors.
Communication with a specific expansion unit controller fails.
A specific expansion unit controller does not work properly.
The physical power state of a specific outlet is different from the
chosen power state set by the software.
299