Variables:
•
•
<rule_number> is the number of the existing rule that you want to remove.
Enabling or Disabling Front Panel Outlet Switching
This section applies to outlet-switching capable models only.
The following CLI commands control whether you can turn on or off an outlet by operating the front
panel display.
▶
To enable the front panel outlet control feature:
config:#
security frontPanelPermissions add switchOutlet
▶
To disable the front panel outlet control feature:
config:#
security frontPanelPermissions remove switchOutlet
Tip: If your PRO3X supports multiple front panel permissions, you can combine them into one command
by adding a semicolon (;) between different permissions. For example, the following CLI command
enables both front panel actuator control and outlet switching functions simultaneously.
security frontPanelPermissions add switchActuator;switchOutlet
Enabling or Disabling Front Panel Actuator Control
The following CLI commands control whether you can turn on or off connected actuator(s) by operating
the front panel LCD display.
▶
To enable the front panel actuator control feature:
config:#
security frontPanelPermissions add switchActuator
▶
To disable the front panel actuator control feature:
config:#
security frontPanelPermissions remove switchActuator
Tip: If your PRO3X supports multiple front panel permissions, you can combine them into one command
by adding a semicolon (;) between different permissions. For example, the following CLI command
enables both front panel actuator control and the internal beeper-muting functions simultaneously.
security frontPanelPermissions add switchActuator;muteBeeper
409
Need help?
Do you have a question about the Server Technology PRO3X and is the answer not in the manual?