LEGRAND Server Technology PRO3X User Manual page 182

HTTPS and HTTP enable the access to the web interface. Telnet and SSH enable the access to the
command line interface.
By default, SSH is enabled, Telnet is disabled, and all TCP ports for supported services are set to
standard ports. You can change default settings if necessary.
Important: PRO3X uses TLS rather than SSL.
Changing HTTP(S) Settings
HTTPS uses Transport Layer Security (TLS) technology to encrypt all traffic to and from the PRO3X so it is
a more secure protocol than HTTP. PRO3X disables TLS 1.0 and 1.1 by default. It enables only TLS 1.2
and 1.3.
By default, any access to the PRO3X via HTTP is automatically redirected to HTTPS. You can disable this
redirection if needed.
▶
HTTP and HTTPS settings:
1) Choose Device Settings > Network Services > HTTP.
2) HTTP settings:
• • Enable or disable HTTP access.
• Default port is 80. You can enter a custom port. •
• • Enforce use of HTTPS: Select the checkbox to Redirect HTTP connections to HTTPS.
3) HTTPS settings:
182