Date And Time Settings; Default Measurement Units; Environmental Sensor Information - LEGRAND Server Technology PRO3X User Manual

Option
A specific
overcurrent
protector number
Displayed information:
• •
Without the parameter "details," only the overcurrent protector status and name are displayed.
• •
With the parameter "details," more overcurrent protector information is displayed in addition to
status, such as the rating and RMS current value.

Date and Time Settings

This command shows the current date and time settings on the PRO3X.
# show time
To show detailed information, add the parameter "details" to the end of the command.
#
show time details

Default Measurement Units

This command shows the default measurement units applied to the PRO3X web and CLI interfaces
across all users, especially those users authenticated through remote authentication servers.
# show user defaultPreferences
Note: If a user has set their own preferred measurement units or the administrator has changed any
user's preferred units, the web and CLI interfaces show the preferred measurement units for that user
instead of the default ones. See
units for a specific user.

Environmental Sensor Information

This command syntax shows the environmental sensor's information.
#
show externalsensors <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show externalsensors <n> details
338
Description
Displays the information for the specified overcurrent
protector only.
Existing User Profiles (on page 348) for the preferred measurement