LEGRAND Server Technology PRO3X User Manual page 246

b. Click the second b.
c. Click c.
For example, to monitor the current reading of the Inlet 1, select Inlet 1 from the left
field, and then select RMS Current from the right field.
6) To report additional sensors simultaneously, repeat the above step to add more sensors.
• • To remove any sensor from the 'Report sensors' list box, select it and click
multiple selections, press Ctrl+click or Shift+click to highlight multiple ones.
7) To immediately send out the sensor report, click Send Report Now.
Tip: When intending to send a sensor report using custom messages, use the placeholder
[SENSORREPORT] to report sensor readings.
Send SMS Message
You can configure SMS messages to be sent when an event occurs and can customize the message.
A supported modem, such as the Cinterion
order to send SMS messages.
Note: The PRO3X cannot receive SMS messages.
Only the 7-bit ASCII charset is supported for SMS messages. Messages consist of a combination of free
text and placeholders. The placeholders represent information retrieved from the device and inserted
into the message. For example:
246
to select the specific sensor for the target from the list.
to add the selected sensor to the Report Sensors list box.
®
GSM MC52i modem, must be plugged into the PRO3X in
. To make