LEGRAND Server Technology PRO3X User Manual page 424

1) Verify that you have entered the configuration mode.
2) Type the following command and press Enter.
config:#
3) Type the existing password and press Enter when the following prompt appears.
Current password:
4) Type the new password and press Enter when the following prompt appears.
Enter new password:
5) Re-type the new password for confirmation and press Enter when the following prompt appears.
Re-type new password:
Setting Default Measurement Units
Default measurement units, including temperature, length, and pressure units, apply to the user
interfaces across all users except for those whose preferred measurement units are set differently by
themselves or the administrator. Diverse measurement unit commands can be combined so that you
can set all default measurement units at a time.
Note: The measurement unit change only applies to the web interface and command line interface.
▶
Set the default temperature unit:
config:# user defaultpreferences preferredTemperatureUnit <option1>
▶
Set the default length unit:
config:# user defaultpreferences preferredLengthUnit <option2>
▶
Set the default pressure unit:
config:# user defaultpreferences preferredPressureUnit <option3>
Variables:
• •
<option1> is one of the options: C or F.
Option Description
C This option displays the temperature in Celsius.
F This option displays the temperature in Fahrenheit.
• • <option2> is one of the options: meter or feet.
424
password