Inlet Configuration Commands - LEGRAND Server Technology PRO3X User Manual

If you entered the command without "/y", a message appears, prompting you to confirm the operation.
Then:
• •
Type y to confirm the operation, OR
Type n to abort the operation
Variables:
• •
<ID> is an outlet group's index number.

Inlet Configuration Commands

An inlet configuration command begins with inlet. You can configure an inlet by using the inlet
configuration command.
Changing the Inlet Name
This command syntax names an inlet.
config:#
Variables:
• •
<n> is the number of the inlet that you want to configure. For a single-inlet PDU, <n> is always 1.
The value is an integer between 1 and 50.
• • <name> is a string comprising up to 64 ASCII printable characters. The <name> variable must be
enclosed in quotes when it contains spaces.
Enabling or Disabling an Inlet (for Multi-Inlet PDUs)
Enabling or disabling an inlet takes effect on a multi-inlet PDU only.
This command enables or disables an inlet.
config:#
Variables:
• •
<n> is the number of the inlet that you want to configure. For a single-inlet PDU, <n> is always 1.
The value is an integer between 1 and 50.
• •
<option> is one of the options: true or false.
Option
true
414
inlet <n> name "<name>"
inlet <n> enabled <option>
Description
The specified inlet is enabled.