Retrieving Energy Usage - LEGRAND Server Technology PRO3X User Manual

Tip: To specify the time zone, use the CLI or web interface instead.
When using the SNMP SET command to specify or change NTP servers, it is required that both the NTP
server's address type and address be set in the command line simultaneously.
For example, the SNMP command to change the primary NTP server's address from IPv4
(192.168.84.84) to host name looks similar to the following:
snmpset -v2c -c private 192.168.84.84 firstNTPServerAddressType = dns
firstNTPServerAddress = "angu.pep.com"

Retrieving Energy Usage

You can discover how much energy an IT device consumes by retrieving the Active Energy for the outlet
this IT device is plugged into. The Active Energy values are included in the
outletSensorMeasurementsTable, along with other outlet sensor readings.
323