LEGRAND Server Technology PRO3X User Manual page 185

a. Select the 'Enable SNMP notifications' checkbox. a.
b. Select a notification type -- SNMPv2c trap, SNMPv2c inform, SNMPv3 trap, and SNMPv3 inform. b.
c. c. Specify the SNMP notification destinations and enter necessary information. For details, refer to:
▪ SNMPv2c Notifications ▪
▪ ▪ SNMPv3 Notifications
Note: Any changes made to the 'SNMP Notifications' section on the SNMP page will update
the settings of the System SNMP Notification Action, and vice versa. To add more than three
SNMP destinations, you can create new SNMP notification actions.
5) You must download the SNMP MIB for your PRO3X to use with your SNMP manager.
a. Click the Download MIBs title bar to show the download links. a.
b. Click the PDU2-MIB download link. See Downloading SNMP MIB. b.
6) Click Save.
Configuring SMTP Settings
The PRO3X can be configured to send alerts or event messages to a specific administrator by email. To
send emails, you have to configure the SMTP settings and enter an IP address for your SMTP server and
a sender's email address.
If any email messages fail to be sent successfully, the failure event and reason are available in the event
log.
▶
To set SMTP server settings:
1) Choose Device Settings > Network Services > SMTP Server.
2) Enter the information needed.
Field
IP address/host name
Port
Sender email address
Number of sending
retries
Time between sending
retries
Description
Type the name or IP address of the mail server.
Type the port number.
• •
Default is 25
Type an email address for the sender.
Type the number of email retries.
• •
Default is 2 retries
Type the interval between email retries in minutes.
• • Default is 2 minutes.
185