LEGRAND Server Technology PRO3X User Manual page 195

▶
To modify a role-based access control rule:
1) Choose Device Settings > Security > Role Based Access Control.
2) Go to the IPv4 or IPv6 section.
3) Select the desired rule in the list.
• Ensure the IPv4 or IPv6 checkbox has been selected, or you may not edit or delete any rule. •
4) Perform the desired action.
• Make changes to the selected rule, and then click Save. •
• Click •
to remove it.
• To resort its order, click •
5) Click Save.
• • IPv4 rules: Make sure you click the Save button in the IPv4 section, or the changes made to IPv4
rules are not saved.
• IPv6 rules: Make sure you click the Save button in the IPv6 section, or the changes made to IPv6 •
rules are not saved.
Setting Up a TLS Certificate
▶
To obtain a CA-signed certificate:
1) Create a Certificate Signing Request (CSR) in Device Settings > TLS Certificates.
2) Submit it to a certificate authority (CA). After the CA processes the information in the CSR, it
provides you with a certificate.
3) Install the CA-signed certificate onto the PRO3X.
Note: If you are using a certificate that is part of a chain of certificates, each part of the chain is signed
during the validation process.
▶
A CSR is not required in either scenario below:
• • Make the PRO3X create a self-signed certificate.
• •
Appropriate, valid certificate and key files are already available, and you only need to import them.
Creating a CSR
Follow this procedure to create the CSR.
▶
To create a CSR:
1) Choose Device Settings > Security > TLS Certificate.
2) In the New TLS Certificate or CSR section, provide the information requested.
• • Subject:
or .
195