LEGRAND Server Technology PRO3X User Manual page 422

▶
Set the preferred pressure unit:
config:# user modify <name> preferredPressureUnit <option3>
Variables:
• • <name> is the name of the user whose settings you want to change.
• •
<option1> is one of the options: C or F.
Option Description
C This option displays the temperature in Celsius.
F This option displays the temperature in Fahrenheit.
• •
<option2> is one of the options: meter or feet.
Option Description
meter This option displays the length or height in meters.
feet This option displays the length or height in feet.
• •
<option3> is one of the options: pascal or psi.
Option Description
pascal This option displays the pressure value in Pascals (Pa).
psi This option displays the pressure value in psi.
Specifying the SSH Public Key
If the SSH key-based authentication is enabled, specify the SSH public key for each user profile using the
following procedure.
▶
To specify or change the SSH public key for a specific user:
1) Type the SSH public key command as shown below and press Enter.
config:#
2) The system prompts you to enter the contents of the SSH public key. Do the following to input the
contents:
422
user modify <name> sshPublicKey