Outlet Configuration Commands - LEGRAND Server Technology PRO3X User Manual

Enabling or Disabling Front Panel Beeper-Sound Control
The following CLI commands control whether you can mute the internal beeper by operating the front
panel LCD display when the beeper sounds.
▶
To enable the front panel beeper sound control feature:
config:#
▶
To disable the front panel actuator control feature:
config:# security frontPanelPermissions remove muteBeeper
Tip: If your PRO3X supports multiple front panel permissions, you can combine them into one command
by adding a semicolon (;) between different permissions. For example, the following CLI command
enables both front panel actuator control and the the internal beeper-muting functions simultaneously.
security frontPanelPermissions add switchActuator;muteBeeper

Outlet Configuration Commands

An outlet configuration command begins with outlet. Such a command allows you to configure an
individual outlet.
Changing the Outlet Name
This command names an outlet.
config:#
Variables:
• •
<n> is the number of the outlet that you want to configure.
• •
<name> is a string comprising up to 64 ASCII printable characters. The <name> variable must be
enclosed in quotes when it contains spaces.
Changing an Outlet's Default State
This section applies to outlet-switching capable models only.
This command determines the initial power condition of an outlet after the PRO3X powers up.
config:#
410
security frontPanelPermissions add muteBeeper
outlet <n> name "<name>"
outlet <n> stateOnPowerUp <option>