Inlet Configuration Commands; Changing The Inlet Name; Enabling Or Disabling An Inlet (For Multi-Inlet Pdus) - LEGRAND Server Technology PRO3X User Manual

Inlet Configuration Commands

An inlet configuration command begins with inlet. You can configure an inlet by using the inlet configuration command.

Changing the Inlet Name

This command syntax names an inlet.
config:# inlet <n> name "<name>"
Variables:
<n> is the number of the inlet that you want to configure. For a single-inlet PDU, <n> is always 1. The value is an integer
between 1 and 50.
<name> is a string comprising up to 64 ASCII printable characters. The <name> variable must be enclosed in quotes when it
contains spaces.

Enabling or Disabling an Inlet (for Multi-Inlet PDUs)

Enabling or disabling an inlet takes effect on a multi-inlet PDU only.
This command enables or disables an inlet.
config:# inlet <n> enabled <option>
Variables:
<n> is the number of the inlet that you want to configure. For a single-inlet PDU, <n> is always 1. The value is an integer
between 1 and 50.
<option> is one of the options: true or false.
Option Description
true The specified inlet is enabled.
false The specified inlet is disabled.
Note: If performing this command causes all inlets to be disabled, a warning message appears, prompting you to confirm.
When this occurs, press y to confirm or n to cancel the operation.
PRO3X User Guide – Command Line Interface (CLI)
105 of 182
Using the PRO3X Command Line Interface (CLI)