Date And Time Settings; Default Measurement Units; Environmental Sensor Information - LEGRAND Server Technology PRO4X User Manual

Date and Time Settings

This command shows the current date and time settings on the PRO4X.
# show time
To show detailed information, add the parameter "details" to the end of the command.
#
show time details

Default Measurement Units

This command shows the default measurement units applied to the PRO4X web and CLI interfaces
across all users, especially those users authenticated through remote authentication servers.
# show user defaultPreferences
Note: If a user has set their own preferred measurement units or the administrator has changed any
user's preferred units, the web and CLI interfaces show the preferred measurement units for that user
instead of the default ones. See
units for a specific user.

Environmental Sensor Information

This command syntax shows the environmental sensor's information.
#
show externalsensors <n>
To show detailed information, add the parameter "details" to the end of the command.
#
show externalsensors <n> details
Existing User Profiles (on page 406) for the preferred measurement
393