Table of Contents
Advertisement
N5244/45AS Option H85
Example: Making High Power Measurements With Option H85
Example: Making High Power Measurements With Option H85
This section describes how to set up the analyzer to perform high power measurements.
Analyzers equipped with the Option H85 can be configured to measure high power devices. This
ability is useful if the required power for the device under test is greater than the analyzer can
provide, or if the maximum output power from an amplifier under test exceeds safe input limits
for a standard analyzer.
This 2-Port example of the high power procedure chooses an optimal power level of -12 dBm
for all receivers. You may choose to optimize your measurement performance by using
Table 1
on page
21.
Typeface Key Conventions
The following key conventions are used throughout this document.
• [HARDKEYS] are labeled front panel keys.
• SOFTKEYS are unlabeled key whose function is indicated on the instrument display.
24
N5245-90002 User's and Service Guide
Advertisement
Table of Contents
