System:scanner:trigger:voltage - Keysight E4981A Programming Manual

Command Reference
E4981A SCPI Commands

:SYSTem:SCANner:TRIGger:VOLTage

Syntax :SYSTem:SCANner:TRIGger:VOLTage <numeric>
:SYSTem:SCANner:TRIGger:VOLTage?
Description Sets the scanner trigger input voltage.
Parameters
Description
Range
Initial (factory set)
value
Unit
Resolution
The value of this command is not changed with
and is only changed with Factory Default reset (available only through
Front Panel).
The product may get damaged if incorrect voltage is set to Scanner
Trigger. Take caution while changing the Scanner Trigger voltage.
{numeric}<newline><^END>
Query response
Equivalent key No equivalent key is available on the front panel.
Keysight E4981A 120 Hz/1 kHz/1 MHz Capacitance Meter
<numeric>
The value of the scanner trigger input voltage
5 to 15
15
V (voltage)
100m
and
*RST :SYSTem:PRESet
285