Step 4: Obtain And Install Coaxial Shunt Resistor De-Embedding File; Verify D9020Asia License On The Dsos104 Oscilloscope - Keysight PD1500A System Installation Manual

Double-pulse test rack and safety enclosure

Hide thumbs Also See for PD1500A:

Table of Contents

Turn-on and Software Installation

Step 4: Obtain and Install Coaxial Shunt Resistor De-Embedding File

For maximum DPT accuracy, the Coaxial Shunt Resistor's De-embedding File

(also known as a Transfer File) must be installed in the DSOS104 Oscilloscope.

Recharacterization of the Coaxial Shunt should be performed annually and the

updated De-embedding file installed in the oscilloscope. The Coaxial Shunt

Resistor's De-Embedding file has to do with maximizing the Shunt Resistor's

bandwidth and requires configuration on the DSOS104A Oscilloscope.

Keysight's D9020ASIA Advanced Signal Integrity Software license should be

installed on the DSOS104 Oscilloscope and the license activated at the factory.

Verify the installation and activation with the following procedure. License

activation instructions and certificate are provided with your DSOS104

Oscilloscope.

To verify that the license is installed and activated:

1 On the oscilloscope select: Help > About Infiniium.

2 Look for InfiniiSim Advanced.

Figure 4

PD1000A De-Embedding License is Activated

Keysight Double-Pulse Test System Installation Guide

Table of Contents