Site Preparation Tasks; Selecting The Installation Site; Physical Specifications And Space Requirements - Stratasys F770 Site Preparation Manual

Site Preparation Guide

Site Preparation Tasks

Selecting the Installation Site

Decide where to install the printer based on the following:
1. Space Requirements
2. Environmental Requirements
3. Electrical Requirements
4. LAN Requirements

Physical Specifications and Space Requirements

Dimensions and Weights
Make sure that the installation site floor space can accommodate the printer's weight and
dimensions, plus required clearances. The installation location must be a flat level surface that
is stable and capable of holding 1700 pounds (770 kg). The caster pads of the F770 printer are
2.752 in
Printer Crated
Printer Uncrated
The F770 printers are capable of generating vibrations depending mainly on part
build geometry and material characteristics. This consideration will need to be
taken into account if locating the printer near vibration sensitive equipment.
2 2
(7 cm ) in footprint size.
Warning:
Due to the physical size and weight of the F770 printer, it is required to use a
forklift when lifting the printer.
Description Weight
2000 pounds (907 kg)
1450 pounds (658 kg)
Site Preparation Tasks
Dimensions
Width: 80 inches (203 cm)
Depth: 60 inches (152 cm)
Height: 84 inches (213cm)
Width: 70 inches (178 cm)
Depth: 52.5 inches (133 cm)
Height: 77 inches (196 cm)
Page 2