Using This Guide; For More Information; Revision History - Stratasys Objet260 User Manual

Objet260 User Guide
Using This Guide
This user guide provides instructions for installing, operating and maintaining
Objet260 3D printing systems. It explains how to use features, and provides
practical examples to guide you as you use the system.
Important: Read the entire Safety chapter before using the system.
The text and figures in this guide are based on the Objet260 3D printer,
software version 29.2 and Objet Studio software version 9.2.
This guide assumes that—
• all the hardware, software, and network components of your s ystem are
• the operator has a working knowledge of the Windows
For More Information
Visit the Stratasys Support Center to download the latest revision of this
document.This document is also available on the Support Center in other
languages.
If you have any questions or comments about the way information is presented
in this guide, or if you have any suggestions for future editions, please send a
message to c-support@stratasys.com.
Revision History
Translations of this guide are updated periodically. If you are consuming a translated
version, please check the English version for the latest revision and list of updates.
The following table lists the main changes in each revision of this document.
Revision Release Date
Rev. I February 2021
Rev. J May 2022
DOC-37004 Rev. J
installed, configured, and operating correctly.
Description
• About this Guide was updated.
• Additional Resources was added.
• Workstation Requirements was updated.
• Replacing the Odor Filter was updated.
• Replacing the UV Lamps was updated with
instructions for replacing the UV lamp bulb.
• Photobleaching for Transparent Parts was
updated.
• Text, style and format improvements.
Replacing the Waste Container was updated
with correct waste container weights.
1 About This Guide
®
PC platform.
1-2