Safety Features - Stratasys Objet260 User Manual

Objet260 User Guide
Safety Features
Interlock Switch
Safety Lock
UV Screening
DOC-37004 Rev. J
Stratasys 3D printers are designed to comply with CE and FCC
standards. They are equipped with the following safety features:
The power supplied to the UV lamp, the tray heater and the
motion motors is turned off when the cover is opened.
Warning
Do not defeat (override) the interlock switch. Doing so could
result in serious personal injury. If the interlock switch does not
function correctly, do not use the printer, and contact your
service provider.
The cover is locked while the printer is working. If you do
manage to lift it, the UV lamps and the motion motors turn off.
Warning
Do not defeat (override) the safety lock. Doing so could
result in serious personal injury. If the safety lock does not
function correctly, do not use the printer, and contact your
service provider.
The transparent section of the cover blocks harmful UV
radiation, allowing the operator to view the 3D prints during the
printing process.
Figure 2-1 Front view of the Objet260 printer
2 Safety
2-2