Safety Instructions; Hazard Types; Product Safety Signs - Stratasys Fortus 360mc User Manual

SAFETY INSTRUCTIONS

The following basic safety tips are given to ensure safe installation, operation, and maintenance of Stratasys
equipment and are not to be considered as comprehensive on matters of safety. The Fortus 360/400mcis
designed to be a safe and reliable rapid prototyping system. Access to areas of the system are potentially
dangerous.

HAZARD TYPES

Stratasys recommends that all services be performed by qualified personnel. All personnel working on or around
this system should be knowledgeable of what the following hazard classifications mean throughout this guide.
• Warnings and Cautions precede the paragraph to which they pertain.
Warning: Indicates a potentially hazardous situation which, if not avoided, may
result in injury or death.
Caution: Indicates a situation which, if not avoided, could result in damage to
equipment.
Notes follow the relative paragraph.
•
Note: Indicates additional information relative to the current topic.

PRODUCT SAFETY SIGNS

Note: Always read and adhere to safety statements, and be aware of the
following safety signs when you see them on the system.
We make every effort to ensure that our systems are safe and reliable at all times. However, there will be times
when you must access areas of the system where potentially high voltages, hot temperatures, and/or moving
mechanical components could cause severe injury.
Personal Injury: The personal injury sign indicates that you are near moving
mechanical parts, and severe personal injury is possible. Always use extra care.
Do not wear ties, loose clothing, or dangling jewelry. Keep long hair tied up and
away from any moving parts.
High Voltage: The high voltage sign indicates the presence of high voltages.
Always stay away from any exposed electrical circuitry. It is recommended that
all jewelry be removed.
2