Table of Contents
Advertisement
Virtual Private Networks (VPN)
4. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu. Type quit to disconnect from the device.
Disable hardware cryptographic acceleration
If you are experiencing problems when using IPSEC, such as the kernel crashing or unexpected
package loss, disabling hardware cryptographic acceleration may correct the problem.
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Select System.
4. Click to disable HW crypto acceleration.
5. Click Apply to save the configuration and apply the change.
The device must be rebooted for the change to take effect. See
IX10 User Guide
Use Digi Remote Manager to view and manage your
Reboot your IX10
IPsec
device.
309
Advertisement
Table of Contents
