Modifying An Existing User; Deleting An Existing User - Spectra Logic T-Series Spectra T200 User Manual

Modifying an Existing User

Use the following steps to change settings for an existing user.
1. Log into the library with superuser privileges.
2. From the toolbar menu, select Security > Edit Users. The Library Users
3. Find the user's name, then select Edit next to the name.
4. Change the user's name, password, group, or any combination of these
5. Select Save to save your changes.

Deleting an Existing User

Use the following steps to delete an existing user.
1. Log into the library with superuser privileges.
2. From the toolbar menu, select Security > Edit Users. The Library Users
3. Locate the name of the user to delete, then select Delete next to that
December 2008
screen displays (see Figure 106 on page
user names.
as required.
Note: For security, the text in the Password field is shown as asterisks
(*).
Note: The library requires a minimum of one Superuser. You cannot
delete the last member of the Superuser group.
screen displays (see Figure 106 on page
user names.
user's name.
When the screen refreshes, the user list no longer includes the user
name you just deleted.
Configuring Library Users
172), showing a list of library
172), showing a list of library
T200, T380, and T680 Libraries
173