Power On The Library; Log Into The User Interface - Spectra Logic T-Series Spectra T50e User Manual

P O
OWER N THE
Follow these steps to power on the library:
1. Press and hold the front panel power button
Figure 23 Press and hold the front panel power button.
2. Wait while the library completes its power-on sequence, which takes six
L I
OG NTO THE
After the power-on sequence completes, the login screen displays.
1. Using the stylus, touch (to select) the User box and type su.
2. Leave the password field blank, and select Login.
3. Wait for the initialization process to complete.
December 2008
L
IBRARY
seconds until the button's LED illuminates.
to seven minutes (depending on the library configuration).
During the power-on sequence the library "discovers" all of its installed
components and initializes them. The library is ready when the login
screen displays on the front panel.
Note: Enter the license keys and configure the library partitions prior
to powering up the host.
U I
SER NTERFACE

Power On the Library

(Figure 23) for two to three
Power
button
Spectra T50e library
51