Setting Up The Remote Library Controller (Rlc); To Enable The Rlc - Spectra Logic Spectra 12000 User Manual

10 Remote Library Controller User Guide

Setting Up the Remote Library Controller (RLC)

Note: You must purchase an Option Enablement Key for
RLC access from Spectra Logic.
To purchase a key call Spectra Logic Technical Support at
(800) 227-4637. Tell the representative that you would like
to purchase the Remote Library Controller Option
Enablement key. You will need the serial number of the
device (as displayed in the Serial # field after tapping the
Robotics bar) when you call. Or, go to the Spectra Logic
Web site at: http://www.spectralogic.com, for ordering
information.

To Enable the RLC

1. From the General Status screen on the Library Controller (LC) of your
library, tap Robotics. The System Setup screen displays (Figure 1-1).
2. Tap the white section next to the Submit Key button in the Gator
Configuration section. A virtual keyboard appears.
Figure 1-1 The System Setup screen.