View Tape Drive Status Information - Spectra Logic T-Series Spectra T50e User Manual

This chapter describes the most common problems encountered with the
library's tape drives. Try these troubleshooting procedures before you open
a support ticket with SpectraGuard Technical Support.
V T D
IEW APE RIVE
The library's Drive Details screen provides information about the current
status of each tape drive in the library. If you think that a tape drive may be
faulty, follow these steps:
1. Select Configuration > Drives. The Drives screen displays
Tape Drive Troubleshooting
Task

View Tape Drive Status Information

General Troubleshooting Tips
Troubleshoot LTO Tape Drives
Note: For additional suggestions or for troubleshooting problems that
are not covered in this guide, search Spectra Logic's online
Technical Support Knowledge Base located at
www.spectralogic.com/knowledgebase.
S I
TATUS NFORMATION
Figure 165 The Drives screen.
Chapter 11
201
Described on...
page 201 below
page 202
page 203
(Figure 165).