Initial Installation Service Mode 1 - Canon imagePRESS 1135 Series Service Manual

2) Turn ON the environment heater switch.

Initial installation Service Mode 1

1) Check that no paper is loaded in the deck and turn ON the main power.
NOTE :
"Floatation fan airflow adjustment"
is automatically executed only if
there is no paper in the deck while
the main power is turned ON.
9
Installation > Installation > Initial installation Service Mode 1
Environmental
heater switch
9 Installation > Installation > Initial installation Service Mode 1
F-9-86
NOTE :
You can get in the Service Mode
even though there is a message;
"Replace the toner container.
Open the toner replacement cover.
Set the toner container", on the
control panel screen.
F-9-87
9-40
9-40