Setting the toner container
CAUTION :
• Check that the front left cover and the front right cover are completely closed
before executing toner supply in Service Mode.
• When the color image reader is not installed simultaneously, check that the
door open/close switch has the sensor push plate.
3) Remove the cap of the toner container and install the toner container.
4) Close the toner replacement inner cover and the toner replacement cover.
NOTE :
It is not necessary to shake the
toner
container.
9
Installation > Installation > Setting the toner container
1) Open the toner replacement cover.
2) Turn ON the toner replacement switch.
9
Installation > Installation > Setting the toner container
9-42
F-9-90
F-9-91
9-42