Moving The Control Panel Arm - Canon imagePRESS 1135 Series Service Manual

Moving the control panel arm

1) Remove the upper right cover 2.
NOTE:
Angle adjustment of the
control panel arm is available
while the power is turned ON.
2) Remove the stopper pin with holding it.
• 1 screw (The removed stopper pin and screw will be used in step 4).)
CAUTION :
Be careful not to drop the stopper pin.
9
Installation > Installation > Moving the control panel arm
F-9-96
x1
9 Installation > Installation > Moving the control panel arm
9-45
F-9-97
9-45