Initial Installation Service Mode 2 - Canon imagePRESS 1135 Series Service Manual

Initial installation Service Mode 2

1) Execute the wire cleaning.
Get in Service Mode to select the following: COPIER > FUNCTION > CLEANING > WIRE-CLN
CAUTION :
Be sure to execute this mode after checking that the host machine
status at the upper right of the Service Mode screen is READY.
3) Patch S light intensity correction/background detection, EPC, DMAX
Get in Service Mode to select the following: COPIER > FUNCTION > MISC-P > INTR-EX (LEVEL 2)
CAUTION :
Be sure to execute this mode after checking that the host machine status at the upper right of the Service Mode screen is READY.
SERVICE MODE
COPIER
9
Installation > Installation > Initial installation Service Mode 2
Display I/O
<CLEANING>
TBLT-CLN
WIRE-CLN OK!
WIRE-EX
FX-CL-FQ
FX-CLN
Display I/O Adjust Function
LEVEL 2
<MISC-P > < 1/ 2 >
INTR-EX
1-ROT-EX
2-ROT-EX
WB
BB BB
P-BASE
P-LED
2-HP
F-9-111
9 Installation > Installation > Initial installation Service Mode 2
Adjust Function Option Test Counter
< 1/ 1 > <READY >
1 5000 5
( 0) { 0 1}
0
OK
F-9-110
Option Test Counter
<READY > <LEVEL 2 >
OK
F-9-112
2) Press reset key once.
4) Exit the service mode.
9-51
9-51