Setting Paper - Canon imagePRESS 1135 Series Service Manual

4) Install the upper front cover.
• 3 stepped screws (tighten the screws loosened in step2).)
• 1 cover rubber

Setting paper

CAUTION :
• Paper needs to be set in the deck; otherwise you cannot check whether the
host machine is READY with the host machine status display at the upper right
on the Service Mode screen.
• Since the paper is detected by the sensor, load the paper with 10 mm or more
in height.
9
Installation > Installation > Setting paper
F-9-103
1) Push the deck open/close button to pull out the deck.
9 Installation > Installation > Setting paper
9-48
F-9-104
9-48