IQS1 Solid Area Density Specification
Procedure
Using Side A of the Standard Test Pattern
ate the solid area density per the following table.
Figure 1 Standard Test Pattern (SideA)(j0st3204)
Table 1 Solid Area Density Specification
Copy
Copie
Quality
s
Mode
Specification
1
Normal
The 1.0 solid area density nearest the center of the
copy should be the 1.0 solid area density block on
the Output Reference Guide.
Launch Version
WorkCentre 5225, 5230
IQS2 Uniformity Specification
Procedure
(Figure
1), evalu-
Make a copy of Side A of the Standard Test Pattern.
The density of all the 1.0 blocks are same
Input
Output
Density
Density
1.0
1.0
(Figure
1).
Figure 1 Standard Test Pattern 1.0 Blocks(j0st3205)
February, 2008
3-13
Image Quality