Iq 32 Ros Borders Rap; Iq 33 Solid Area Reproduction Rap - Xerox DocuColor 12/DCCS50 Service Manual

IQ 32 ROS Borders RAP

Intentional border deletions that exceed specifications (refer to
Procedure
Perform the ADJ 9.1.10 Side/Lead Edge Registration (dC129: System Registration).
Reissue
DocuColor 12/DCCS50

IQ 33 Solid Area Reproduction RAP

ROS Borders for details). Initial Actions
Load some new, dry 24 lb 11X17/A3 Xerox COLOR Xpressions (NASG), or 90 GSM Colortech
+ (ESG) into the paper tray. Make full color copies and check the Solid Area Reproduction.
NOTE: After replacing developer material, go to IQ47 ATC Sensor RAP,
up procedure.
Procedure
Perform the following:
•
•
•
•
•
•
1/05
3-33
Replace the developer if the developer is near or over HFSI threshold.
Replace the IBT Belt if the IBT Belt is over HFSI threshold.
Perform ADJ 9.1.1 Max Setup.
Check for Mottle/BCO IQ 22 Mottle RAP.
Check the 1st BTR HVPS IQ 41 1st BTR HVPS
Check the 2nd BRT HVPS IQ 40 2nd BTR HVPS RAP
IQ 32 ROS Borders RAP, IQ 33 Solid Area Repro-
Appendix 1. ATC set-
RAP.
Image Quality