Port-Based Vlan Configuration Commands; Port - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – VLAN Commands
This may delete all static VLAN except the VLAN kept by protocol and the default
VLAN.
Continue?[Y/N]:y
This operation may take a few minutes.
Please wait...
Can't delete vlan when shared-vlan enabled!
Can't delete vlan when voice vlan enabled
Cannot delete remote probe VLAN
Fail to delete VLAN: 2, 5, 20
Done.

1.2 Port-Based VLAN Configuration Commands

1.2.1 port

Syntax
port interface-list
undo port interface-list
View
VLAN view
Parameter
interface-list: List of Ethernet ports to be added to or removed from a VLAN. You need
to provide this argument in the form of interface-list = { interface-type interface-number
[ to interface-type interface-number ] } &<1-10>, where:
interface-type is port type and interface-number is port number. For detailed
explanation, refer to port related command part in this manual.
The port number to the right of the to keyword must be larger than or equal to the
one to the left of the keyword.
&<1-10> means that you can provide this argument repeatedly for up to 10 times.
Parameter
Use the port command to add a port or multiple ports to a VLAN.
Use the undo port command to remove a port or multiple ports from a VLAN.
Chapter 1 VLAN Configuration Commands
1-11