Save - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Configuration File Management
<3Com> reset saved-configuration
The saved configuration will be erased.
Are you sure?[Y/N]y
Configuration in flash memory is being cleared.
Please wait ...
....
Configuration in flash memory is cleared.

1.1.6 save

Syntax
save [ file-name | safely ]
View
User view
Parameter
file-name: File name with the extension name ".cfg", a character string of 5 to 56
characters.
safely: Saves the configuration files to the flash memory in the safely mode.
Description
Use the save command to save the current configuration files to the Flash memory.
After finishing a group of configurations and achieving corresponding functions, user
should remember to get the current configuration files stored in the flash memory.
The configured files can be saved in one of the following two ways:
Fast saving: in this mode, the configuration files are saved fast. However, if
restart or power-off occurs in the saving procedure, the configuration files will be
lost.
Safely saving: in this mode, the configuration files are saved slowly. However,
even if restart or power-off occurs in the saving procedure, the configuration
files still exist.
If the save command is executed without the safely keyword, the configuration files
are saved in the fast saving mode. If the save command is executed with the safely
keyword, the configuration files are saved in the safely saving mode.
You are recommended to adopt the fast saving mode in the conditions of stable
power and adopt the safely saving mode in the conditions of unstable power or
remote maintenance.
Related command: reset saved-configuration, display current-configuration,
display saved-configuration.
Chapter 1 Configuration File Management
1-11
Commands