Display Saved-Configuration - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Configuration File Management

1.1.2 display saved-configuration

Syntax
display saved-configuration
View
Any view
Parameter
None
Description
Use the display saved-configuration command to view the configuration files
saved in the flash memory of the Ethernet Switch.
If the Ethernet Switch works abnormally after startup, execute the display
saved-configuration command to view the startup configuration of the Ethernet
Switch.
Related
current-configuration.
Example
# Display configuration files in flash memory of the Ethernet Switch.
<3Com> display saved-configuration
#
sysname 3Com
#
local-user abc password simple abc
#
tcp window 8
#
interface Aux7/0/1
link-protocol ppp
#
interface Ethernet4/0/1
#
interface Ethernet4/0/2
#
interface Ethernet4/0/3
ip address 10.110.101.17 255.255.255.0
#
interface NULL0
command: save,
Chapter 1 Configuration File Management
reset saved-configuration,
1-7
Commands
display