3Com 7750 Series Command Reference Manual page 33

3Com Switch 7750 Series
Command Reference Guide – Login
Example
# Configure that commands of level 0 are available to the users logging into VTY 0.
<3Com> system-view
System View: return to User View with Ctrl+Z.
[3Com] user-interface vty 0
[3Com-ui-vty0] user privilege level 0
# You can verify the above configuration by Telneting to VTY 0 and displaying the
available commands, as listed in the following.
<3Com> ?
User view commands:
cluster
debugging
language-mode
ping
quit
super
telnet
tracert
undo
Run cluster command
Enable system debugging functions
Specify the language environment
Send echo message
Exit from current command view
Privilege current user a specified priority level
Establish one TELNET connection
Trace route function
Cancel current setting
1-25
Chapter 1 Login Commands