Load & Save - Siemens SCALANCE XB-200 Configuration Manual

5.4.5 Load & Save
Overview of the file types
File type
Config
ConfigPack
Copyright
Debug
EDS
Firmware
GSDML
HTTPSCert
LogFile
MIB
RunningCLI
Script
StartupInfo
Users
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Description
This file contains the start configuration.
Among other things, this device contains the definitions of the users. The
passwords are stored the file "Users".
Detailed configuration information. for example, start configuration, users,
certificates
ZIP file consisting of the Config, Users and LSYS fle.
OSS licenses
This file contains information for Siemens Support.
It is encrypted and can be sent by e-mail to Siemens Support without any se-
curity risk.
Electronic Data Sheet (EDS)
Electronic data sheet for describing devices in the EtherNet/IP mode
The firmware is signed and encrypted. This ensures that only firmware created
by Siemens can be downloaded to the device.
PROFINET information on the device properties
Default HTTPS certificates including key
The preset and automatically created HTTPS certificates are self-signed.
We strongly recommend that you create your own HTTPS certificates and
make them available. We recommend that you use HTTPS certificates signed
either by a reliable external or by an internal certification authority. The HTTPS
certificate checks the identity of the device and controls the encrypted data
exchange.
Certificates with a different format cannot be copied in.
File with entries from the event log table
Private MSPS MIB file
Text file with CLI commands
This file contains an overview of the current configuration in the form of CLI
commands. You can download the text file. The file is not intended to be up-
loaded again unchanged.
Text file with CLI commands
You can upload a script file in a device. The CLI commands it contains are
executed appropriately.
Startup log file
This file contains the messages that were entered in the log during the last
startup.
This file contains the assignment of the user names to the corresponding
passwords.
Configuring with Web Based Management
5.4 The "System" menu
93