Usb/Rs-485 Communication Interface Ifd6530 - Delta C2000 series User Manual

Chapter 7 Optional Accessories |C2000 Series

USB/RS-485 Communication Interface IFD6530

Warning
Please thoroughly read this instruction sheet before installation and putting it into use.
The content of this instruction sheet and the driver file may be revised without prior notice. Please
consult our distributors or download the most updated instruction/driver version at
http://www.delta.com.tw/product/em/control/cm/control_cm_main.asp
1. Introduction
IFD6530 is a convenient RS-485-to-USB converter, which does not require external power-supply and complex
setting process. It supports baud rate from 75 to 115.2kbps and auto switching direction of data transmission. In
addition, it adopts RJ-45 in RS-485 connector for users to wire conveniently. And its tiny dimension, handy use of
plug-and-play and hot-swap provide more conveniences for connecting all DELTA IABU products to your PC.
Applicable Models: All DELTA IABU products.
(Application & Dimension)
2. Specifications
Power supply
Power consumption
Isolated voltage
Baud rate
RS-485 connector
USB connector
Compatibility
Max. cable length
Support RS-485 half-duplex transmission
No external power is needed
1.5W
2,500VDC
75, 150, 300, 600, 1,200, 2,400, 4,800, 9,600, 19,200, 38,400, 57,600, 115,200 bps
RJ-45
A type (plug)
Full compliance with USB V2.0 specification
RS-485 Communication Port: 100 m
7-44