Delta C2000 series User Manual page 355

Chapter 12 Description of Parameter Settings|C2000 Series
Other Setting of DeviceNet Speed
Settings
It needs to use with Pr.09-71.
Setting 0: the baud rate can only be set to 0, 1, 2 or 3.
Setting 1: setting of DeviceNet baud rate can be the same as CANopen (setting 0-8).
Reserved
Reserved
IP Configuration of the Communication Card
Settings
Setting 0: it needs to set IP address manually.
Setting 1: IP address will be auto set by host controller.
IP Address 1 of the Communication Card
IP Address 2 of the Communication Card
IP Address 3 of the Communication Card
IP Address 4 of the Communication Card
Settings
Address Mask 1 of the Communication Card
Address Mask 2 of the Communication Card
Address Mask 3 of the Communication Card
Address Mask 4 of the Communication Card
Settings
Getway Address 1 of the Communication Card
Getway Address 2 of the Communication Card
Getway Address 3 of the Communication Card
Getway Address 4 of the Communication Card
Settings
8: 1Mbps
0: Disable
1: Enable
0: Static IP
1: DynamicIP (DHCP)
0~255
0~255
0~255
12-148
Factory Setting: 0
Factory Setting: 0
Factory Setting: 0
Factory Setting: 0
Factory Setting: 0