Led Indicator & Troubleshooting - Delta C2000 series User Manual

LED Indicator & Troubleshooting
LED Indicators
LED Status
POWER Green
Flashes
LINK Green
Troubleshooting
Abnormality
AC motor drive not powered
POWER LED off
CMC-MOD01 not connected
to AC motor drive
CMC-MOD01 not connected
to network
LINK LED off
Poor contact to RJ-45
connector
CMC-MOD01 not connected
to network
No module found
PC and CMC-MOD01 in
different networks and
blocked by network firewall.
CMC-MOD01 not connected
to network
Fail to open
Incorrect communication
CMC-MOD01 setting in DCISoft
setup page
PC and CMC-MOD01 in
different networks and
blocked by network firewall.
Able to open
CMC-MOD01
Incorrect network setting in
setup page but fail
CMC-MOD01
to utilize webpage
monitoring
Incorrect network setting in
CMC-MOD01
Fail to send e-mail
Incorrect mail server setting
Indication
On Power supply in normal status
Off No power supply
On Network connection in normal status
Network in operation
Off
Network not connected
Cause
Chapter 8 Optional Cards |C2000 Series
How to correct it?
Check if AC motor drive is powered, and if the
power supply is normal.
Make sure CMC-MOD01 is connected to AC motor
drive.
Make sure the network cable is correctly connected
to network.
Make sure RJ-45 connector is connected to
Ethernet port.
Make sure CMC-MOD01 is connected to network.
Search by IP or set up relevant settings by AC
motor drive keypad.
Make sure CMC-MOD01 is connected to the
network.
Make sure the communication setting in DCISoft is
set to Ethernet.
Conduct the setup by AC motor drive keypad.
Check if the network setting for CMC-MOD01 is
correct. For the Intranet setting in your company,
please consult your IT staff. For the Internet setting
in your home, please refer to the network setting
instruction provided by your ISP.
Check if the network setting for CMC-MOD01 is
correct.
Please confirm the IP address for SMTP-Server.
8-17
How to correct it?
--
Check the power supply
--
--
Check if the network cable is
connected