Jog Frequency; 1St/4Th Accel./Decel. Frequency; S-Curve Acceleration/Deceleration - Delta C2000 series User Manual

JOG Frequency

Settings 0.00~600.00Hz
Both external terminal JOG and key "F1" on the keypad KPC-CC01 can be used. When the jog
command is ON, the AC motor drive will accelerate from 0Hz to jog frequency (Pr.01-22). When the
jog command is OFF, the AC motor drive will decelerate from Jog Frequency to zero. The Jog
Accel./Decel. time (Pr.01-20, Pr.01-21) is the time that accelerates from 0.0Hz to Pr.01-22 JOG
Frequency.
The JOG command can't be executed when the AC motor drive is running. In the same way, when
the JOG command is executing, other operation commands are invalid except forward/reverse
commands and STOP key on the digital keypad.
It does not support JOG function in the optional keypad KPC-CE01.

1st/4th Accel./decel. Frequency

Settings 0.00~600.00Hz
The transition from acceleration/deceleration time 1 to acceleration/deceleration time 4, may also
be enabled by the external terminals. The external terminal has priority over Pr. 01-23.
F reque nc y
01-23
S-curve Acceleration Begin Time 1
S-curve Acceleration Arrival Time 2
S-curve Deceleration Begin Time 1
S-curve Deceleration Arrival Time 2
Settings Pr.01-45=0: 0.00~25.00 seconds
Pr.01-45=1: 0.00~250.0 seconds
It is used to give the smoothest transition between speed changes. The accel./decel. curve can
adjust the S-curve of the accel./decel. When it is enabled, the drive will have different accel./decel.
curve by the accel./decel. time.
The S-curve function is disabled when accel./decel. time is set to 0.
When Pr.01-12, 01-14, 01-16, 01-18 ≥ Pr.01-24 and Pr.01-25,
The Actual Accel. Time = Pr.01-12, 01-14, 01-16, 01-18 + (Pr.01-24 + Pr.01-25)/2
When Pr.01-13, 01-15, 01-17, 01-19 ≥ Pr.01-26 and Pr.01-27,
The Actual Decel. Time = Pr.01-13, 01-15, 01-17, 01-19 + (Pr.01-26 + Pr.01-27)/2
Chapter 12 Description of Parameter Settings|C2000 Series
1st Acceler ati on
Time
4th A cceleratio n
Time
1st/4th A cceleratio n/Dec eleration F requenc y S witch i ng
12-26
Factory Setting: 6.00
Factory Setting: 0.00
4th Dec ele ration
T ime
1s t Dec eleratio n
T ime
Factory Setting: 0.20/0.2
Ti me