Control Terminals - Delta C2000 series User Manual

Please remove the top cover before wiring the multi-function input and output terminals,
The drive appearances shown in the figures are for reference only, a real drive may look different.
Remove the cover for wiring. Frame A~H
Frame A&B
Loosen the screws and press the tabs on both sides
to remove the cover.
Screw torque: 12~15Kg-cm [10.4~13lb-in.]
Frame E
Screw torque: 12~15Kg-cm [10.4~13lb-in.] To remove the cover, lift it slightly and pull outward.
Frame F
Screw torque: 12~15Kg-cm [10.4~13lb-in.] To remove the cover, lift it slightly and pull outward
Chapter 6 Control Terminals
Frame C&D
Screw torque: 12~15Kg-cm [10.4~13lb-in.]
6-1
Chapter 6 Control Terminals|C2000 Series