Chapter 12 Description of Parameter Settings|C2000 Series
~
Reserved
Communication Decoding Method
Settings 0: Decoding Method 1
Source of
Digital Keypd
Operation
External
Control
Terminal
RS-485
CANopen
Communication
Card
PLC
Internal Communication Protocol
Settings 0: Modbus 485
~
Reserved
PLC Address
1: Decoding Method 2
Decoding Method 1
Digital keypad controls the drive action regardless decoding method 1 or 2.
External terminal controls the drive action regardless decoding method 1 or 2.
Refer to address: 2000h~20FFh
Refer to index: 2020-01h~2020-FFh
Refer to address: 2000h ~ 20FFh
PLC commands the drive action regardless decoding method 1 or 2.
-1: Internal Communication Slave 1
-2: Internal Communication Slave 2
-3: Internal Communication Slave 3
-4: Internal Communication Slave 4
-5: Internal Communication Slave 5
-6: Internal Communication Slave 6
-7: Internal Communication Slave 7
-8: Internal Communication Slave 8
-9: Reserve
-10: Internal Communication Master
-11: Reserve
-12: Internal PLC Control
Refer to address: 6000h ~ 60FFh
Refer to index:2060-01h ~ 2060-FFh
Refer to address: 6000h ~ 60FFh
12-144
Factory Setting: 1
Decoding Method 2
Factory Setting: 0
Factory Setting: 2